Water Pumps and Accessories

.:: Water Pumps ::.


		Lightweight aluminum high performance Small Block Chevy water pump with ceramic seals, and a 3/4" shaft. Features high rpm bearings and a backing plate on the propeller to reduce the risk of cavitation.
		WP-9104-SBC-AL


		Inexpensive, steel high performance Small Block Chevy water pump with ceramic seals, and a 3/4" shaft. Features high rpm bearings and a backing plate on the propeller to reduce the risk of cavitation.
		WP-9104-SBC-ST


		Lightweight aluminum high performance Big Block Chevy water pump with ceramic seals, and a 3/4" shaft. Features high rpm bearings and a backing plate on the propeller to reduce the risk of cavitation.
		WP-9104-BBC-AL


		Lightweight aluminum high performance Small Block Chrysler water pump with ceramic seals, and a 3/4" shaft. Features high rpm bearings and a backing plate on the propeller to reduce the risk of cavitation.
		WP-9104-MPR-AL


		Lightweight aluminum high performance Small Block Ford water pump with ceramic seals, and a 3/4" shaft. Features high rpm bearings and a backing plate on the propeller to reduce the risk of cavitation.
		WP-9104-SBF-AL

.:: Edelbrock Water Pumps ::.

		SBC Edelbrock Victor-Pro series water pump. with a 3/4" shaft and two 3/8 NPT auxilary outlets at 45 degrees to the block. Features high rpm bearings and high-flow propeller.
		EDE-8817

		SBC Edelbrock Victor-Pro series water pump. with a 3/4" shaft and two -10 AN auxilary outlets. Features high rpm bearings and high-flow propeller.
		EDE-8819


		SBF Edelbrock Victor Series water pump. with a 3/4" shaft. Features high rpm bearings and high-flow propeller.
		EDE-8833


		BBC Edelbrock short water pump. with a 3/4" shaft. Features high rpm bearings and high-flow propeller.
		EDE-8852

.:: Radius Tooth HTD Water Pump Pulleys ::.


		Lightweight, billet aluminum, Radius Tooth HTD water pump pulley, belt adjustment from 0" to 1.1" with a 20mm wide belt. This measurement is from the face of water pump hub.
		WP-6104-35-A WP-6104-36-A WP-6104-37-A	35 teeth 36 teeth 37 teeth


		Lightweight, billet aluminum, Radius Tooth HTD water pump pulley, belt adjustment from 1.85" to 2.0" with a 20mm wide belt. This measurement is from the face of water pump hub.
		WP-6104-35S WP-6104-36S WP-6104-37S WP-6104-40S	35 teeth 36 teeth 37 teeth 40 teeth


		Lightweight, billet aluminum, Radius Tooth HTD water pump pulley, belt adjustment from 1.875" to 2.740" with a 20mm wide belt. This measurement is from the face of water pump hub.
		WP-6104-37-F1	37 teeth

.:: Serpentine Poly-V Water Pump Pulleys ::.


		Lightweight, billet aluminum, Serpentine Poly-V water pump pulley, .670" offset. Each of our serpentine water pump pulleys has a 7th groove for ease of alignment.
		WP-5104-D-4"	4", .670" offset.


		Lightweight, billet aluminum, Serpentine Poly-V water pump pulley, 1.135" offset. Each of our serpentine water pump pulleys has a 7th groove for ease of alignment.
		WP-5104-C-4	4", 1.135" offset


		Aluminum, modular, power steering tank with built-in fittings & universal mounting bracket to mount to any size frame rail.
		WP-5104-F-4	4" O.D.


		Lightweight, billet aluminum, Serpentine Poly-V water pump pulley, 2.320" offset. Each of our serpentine water pump pulleys has a 7th groove for ease of alignment.
		WP-5104-WC-5"	5" O.D.


		The offset measurement is the distance from the top-center of the last groove shown with pointer) to the inside face that sits against the water pump hub. This distance can now be compared to the distance from the face of the water pump hub to the face of the balancer to ensure proper belt alignment

.:: V-Belt Water Pump Pulleys ::.


		Lightweight, billet aluminum, single v-belt design. 2.215" offset from face of water pump hub to center of V.
		WP-3104-A-6"-S.V. WP-3104-B-7"-S.V.	6",1-V 7",1-V


		Lightweight, billet aluminum, single v-belt design. 1.465" offset from face of water pump hub to center of first V, 2.215 to center of second V.
		WP-3104-A-6"-D.V. WP-3104-B-7"-D.V.	6",2-V 7",2-V


		Lightweight, billet aluminum, triple V-Belt design. .715" offset from face of water pump hub to center of first V, 1.465" to second V & 2.215" to the center of third V.
		WP-3104-F-7"-T.V.	7",3-V


		Lightweight, billet aluminum, triple V-Belt design for Dodge engines. .715" offset from face of water pump hub to center of first V, 1.465" to second V & 2.215" to the center of third V.
		WP-3104-G-5⅞" WP-3104-H-7 O.D.	5⅞" 3-V 7" 3-V


		The offset measurement is the distance from the inside-center of the v-groove (shown with pointers) to the inside face that sits against the water pump hub. This distance can now be compared to the distance from the face of the water pump hub to the face of the balancer to ensure proper belt alignment

.:: Gilmer Water Pump Pulleys ::.


		Mounts to the block by the crank case and the head to prevent flexing. This bracket will work on the left or right side of the engine and is compatible with our and most aftermarket power steering pumps.
		WP-4104-28	28 Teeth

.:: Water Pump Spacers ::.


		Billet aluminum water pump spacers for Small Block Chevy, Available in either 1/4", 3/8" or 1/2" widths
		WP-9104-¼-SB WP-9104-⅜-SB WP-9104-½-SB	¼" Wide ⅜" Wide ½" Wide


		Billet aluminum water pump spacers for Big Block Chevy, Available in either 1/4", 3/8" or 1/2" widths
		WP-9104-¼-BB WP-9104-⅜-BB WP-9104-½-BB	¼" Wide ⅜" Wide ½" Wide

.:: Water Pump Accessories ::.


		Billet aluminum water restrictor. Our Restrictor is placed in the bottom outlet of the radiator. This holds the water in the radiator longer, allowing the airflow through the radiator to properly cool the water.
		RR-9104-A


		Billet aluminum shaft extension for use with JRP drive pulleys which mount in front of the water pump pulley. This bushing allows you to properly register & relocate the fan with the water pump shaft.
		WP-6104-C


		Billet aluminum bushing with .750" outside diameter and a .625" inside diameter to allow all of our water pump pulleys to work on either a .625 shaft or .750 shaft.
		WP-6104-B