JonesRacingProducts.com
Crankshaft
Belts
Alternator
Dry Sump
Fuel Pump
Power Steering
Vacuum
Water Pump
Kits
Tools
Catalog
About
.:: Small Block Chevy ::.
3 1/2" long drive hub, mounts with 3 bolts and uses a self contained bolt and end cap to secure your drive pulleys. The BBC has a built-in boss that registers the hub to the balancer, small block Chevys require the DH-8101-ADP-SB balancer adapter.
DH-8101-WC-BB
SBC & BBC drive hub mounts to balancer using 3 bolts and through bolt. DH-8101-C uses any of our DHM-8101 drive mandrel.
DH-8101-C  
SBC & BBC drive hub mounts to balancer uses 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.
DH-8101-C-DP  
2 inch long, 1 1/8" O.D. drive mandrel, with built-in spacer. This hub features a built-in nut to turn over the engine. Mounts with a through bolt and woodruff key inside the I.D. of your SBC balancer.
DH-8101-NE-A  
3.625 inch long, 1 1/8" O.D. drive mandrel, with built-in spacer. This hub features a built-in nut to turn over the engine. Mounts with a through bolt and woodruff key inside the I.D. of your SB Chevy balancer.
DH-8101-NE-B  
4 inch long, 1 1/8" O.D. drive mandrel. This hub features a built-in nut to turn over the engine. Mounts with a through bolt and woodruff key inside the I.D. of your SBC balancer.
DH-8101-NE-C  
1 9/16" long drive hub. Mounts with three bolts and a machined O.D. boss to register the hub to the Ford & Chevy balancers. This hubs uses a self contained bolt and end cap to secure your drive pulleys.
DH-8101-WC-DE  
2 1/16" long drive hub. Mounts with three bolts and a machined O.D. boss to register the hub to the Ford & Chevy balancers. This hubs uses a self contained bolt and end cap to secure your drive pulleys.
DH-8101-WC-SR  
Billet aluminum drive hub, mounts 1 set of split-V-Belt pulleys. Bolts to BBC and SBC balancers. SB Chevy requires DH-8101-ADP-SB.
DH-3102-B  
Billet aluminum drive hub, mounts up to 2 sets of split-V-Belt pulleys. Bolts to BBC and SBC balancers. SB Chevy requires DH-8101-ADP-SB.
DH-3102-A  
Billet aluminum drive hub, mounts up to 3 sets of split-V-Belt pulleys. Bolts to BBC and SBC balancers. SB Chevy requires DH-8101-ADP-SB.
DH-3102-D  
Billet aluminum drive hub, mounts up to 4 sets of split-V-Belt pulleys. Bolts to BBC and SBC balancers. SB Chevy requires DH-8101-ADP-SB.
DH-3102-c  
Billet aluminum drive hub for SBC balancer. Slides inside of balancer and uses a through bolt & woodruff key to mount. Accepts all DHM-8101 drive mandrels.
DH-8101-C-DP  
Billet aluminum balancer adapter, converts a hub from a BB Chevy to a SB Chevy.
DH-8101-ADP-SB  
Billet aluminum, lightweight, drive hub spacers. Available in 1/4, 1/2 & 3/4" thicknesses, for use with DH-3102-A or B hubs.
SP-3102-WC-1/4"
SP-3102-WC-1/2"

SP-3102-WC-3/4"
 
SBC & BBC drive hub mounts to balancer using 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.

DHM-8101-A 1.25"
DHM-8101-B 3.50"
DHM-8101-C 4.00"
DHM-8101-D 4.50"
DHM-8101-E 5.00"

 
 
.:: Big Block Chevy ::.
3 1/2" long drive hub, mounts with 3 bolts and uses a self contained bolt and end cap to secure your drive pulleys. The BBC has a built-in boss that registers the hub to the balancer, small block Chevys require the DH-8101-ADP-SB balancer adapter.
DH-8101-WC-BB  
SBC & BBC drive hub mounts to balancer using 3 bolts and through bolt. DH-8101-C uses any of our DHM-8101 drive mandrel.
DH-8101-C  
SBC & BBC drive hub mounts to balancer uses 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.
DH-8101-C-DP  
Adapter to convert a SBC drive hub to fit
to a BBC Balancer DH-3102-ADP
DH-3102-ADP  
1 9/16" long drive hub. Mounts with three bolts and a machined O.D. boss to register the hub to the Ford & Chevy balancers. This hubs uses a self contained bolt and end cap to secure your drive pulleys.
DH-8101-WC-DE  
2 1/16" long drive hub. Mounts with three bolts and a machined O.D. boss to register the hub to the Ford & Chevy balancers. This hubs uses a self contained bolt and end cap to secure your drive pulleys.
DH-8101-WC-SR  
SBC & BBC drive hub mounts to balancer using 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.
DH-3102-B  
SBC & BBC drive hub mounts to balancer using 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.
DH-3102-A  
SBC & BBC drive hub mounts to balancer using 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.
DH-3102-D  
SBC & BBC drive hub mounts to balancer using 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.
DH-3102-c  
SBC & BBC drive hub mounts to balancer using 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.
DH-8101-C-DP  
Billet aluminum, lightweight, drive hub spacers. Available in 1/4, 1/2 & 3/4" thicknesses, for use with DH-3102-A or B hubs.
SP-3102-WC-1/4"
SP-3102-WC-1/2"

SP-3102-WC-3/4"
 
SBC & BBC drive hub mounts to balancer using 3 bolts & through bolt. DH-8101-C-DP accepts all of our dual dowel components.

DHM-8101-A 1.25"
DHM-8101-B 3.50"
DHM-8101-C 4.00"
DHM-8101-D 4.50"
DHM-8101-E 5.00"

 
 
.:: Chrysler ::.
SBR & BBR drive hub mounts to balancer using 6 bolts and has a machined I.D. boss to register it to the balancer. This hub uses a self contained bolt & end cap, part # BEC-2109-HC, to secure the pulleys.
DH-8101-WC-C  
 
.:: Ford 3 & 4 Bolt ::.
3.5" long drive mandrel. This hub mounts
with 3 bolts and a machined O.D. boss
registers the hub to your 3-bolt Ford
balancer. This hub uses a self contained
bolt & end cap to secure the pulleys.
DH-8101-WC-F3-3.5  
3" long drive mandrel. This hub
mounts with 4 bolts & a machined
I.D. bore to register on the Ford 351
4-bolt balancer. This hub uses a
self contained bolt and end cap to
secure your drive pulleys.
DH-8101-351W-F4  
3" long drive mandrel. This hub
mounts with 4 bolts and a machined
I.D. bore to register on the Ford 460
4-bolt balancer. This hub uses a self
contained bolt & end cap to secure
your drive pulleys.
DH-8101-WC-F4-460  
1 9/16" long drive hub. Mounts with three bolts and a machined O.D. boss to register the hub to the Ford & Chevy balancers. This hubs uses a self contained bolt and end cap to secure your drive pulleys.
DH-8101-WC-DE  
2 1/16" long drive hub. Mounts with three bolts and a machined O.D. boss to register the hub to the Ford & Chevy balancers. This hubs uses a self contained bolt and end cap to secure your drive pulleys.
DH-8101-WC-SR  
Billet aluminum drive hub
adapter. Bolts to your Ford
balancer to allow use of our
Chevy drive hubs.
DH-3102-F3-ADP  
 
.:: Accessories ::.
Billet drive hub mounts to the front of a
DH-3102-A, B, C or D hub to allow the use
of a 17 to 22 tooth radius tooth HTD crank
shaft pulley or a 12 to 16 tooth square tooth
Gilmer pulley. DH-3101-WC
DH-3101-WC  
Billet aluminum balancer adapter, converts a hub from a BB Chevy to a SB Chevy.
DH-8101-ADP-SB  
Adapter to convert a SBC drive hub to fit
to a BBC Balancer DH-3102-ADP
DH-3102-ADP  
Billet aluminum drive hub
adapter. Bolts to your Ford
balancer to allow use of our
Chevy drive hubs.
DH-3102-F3-ADP  
Billet aluminum, lightweight, drive hub spacers. Available in 1/4, 1/2 & 3/4" thicknesses, for use with DH-3102-A or B hubs.
SP-3102-WC-1/4"
SP-3102-WC-1/2"

SP-3102-WC-3/4"
 
Billet aluminum, lightweight, drive pulley spacers. Available in 1/4, 3/8, 1/2, 3/4, 1 and 1 1/4" thicknesses, Replace 'I.D.' with 'A' for 1 1/8" or 'B' for 1" bore.
SP-6103-A-I.D.-1/4"
SP-6103-A-I.D.-3/8"

SP-6103-A-I.D.-1/2"
SP-6103-A-I.D.-3/4"
SP-6103-A-I.D.-1"
SP-6103-A-I.D.-1 1/4"
 
Billet aluminum, lightweight, drive pulley spacers. Available in 1/4, 3/8, 1/2, 3/4, 1 and 1 1/4" thicknesses, Replace 'I.D.' with 'A' for 1 1/8" or 'B' for 1" bore.
SP-6103-wc-A-1/4"
SP-6103-wc-B-3/8"

SP-6103-wc-C-1/2"
SP-6103-wc-D-3/4"
SP-6103-wc-E-1"
SP-6103-wc-F-1 1/4"
 
 
 
lrgImg
© Jones Machine Racing Products, Inc.
72 Annawanda Road Ottsville, PA 18942-9702
Phone: 610.847.2028 Fax: 610.847.8895